|
|
Hardware for battery clamp
|
Bracket only
Powder-coated John Deere green
M83518
|
Price: $219.99 Temporarily out of stock - more due March 15
For 1968-74 Models 110, 112, 120, 140, 200 & 300 series lawn & garden tractors.
|
Price: $29.99 Temporarily out of stock as of 05/17/22
The Hydraulic Hose Caps are designed for John Deere 120 & 140 Implements. This is a set of 2 Caps, also available individually.
|
Hydraulic Outlet Plug Set of 2 for John Deere Model 120/140 tractors.
Caps are also available for Implements
|
Price: $16.99 Temporarily out of stock as of 05/17/22
The Hydraulic Hose Caps are designed for John Deere 120 & 140 Implements. These are also available in a set of 2.
|
Hydraulic Outlet Plug is for John Deere Model 120 & 140 tractors.
Caps are also available for Implements
|
Price: $15.00 Temporarily out of stock
Category “0” Lift Arm Pins for Brinly Three-Point Attachments (2-piece set)
|
Heavy Duty Air-Cleaner Adapter for 1968-74
Models 110, 112, 120 & 140
|
Price: $49.99 Temporarily out of stock as of 06/19/21
GAS CAP & GAUGE for 1965-74
Models 110, 112, 120, & 140
|
Spark Plug Coil Wire
Model 110, 120, 140
Length: 25 1/2"
|
Pedestal Isolator 22" long
Protect your hood from getting damaged from the metal edges on the dash.
|
43C & 54C Center Blade rear mounting bracket set
For 1968-74 John Deere 110, 112, 120, 140 and 200 Series.
|
Kohler Genuine Ignition System Breaker Points
|
Condenser for ignition system -- sometimes called capacitor
|
Breaker Push Rod for Kohler models K241 (10hp) & K301 (12hp) engines
For 1969-74 Models 110 & 112
For 1970-71 Model 120
For 1968 Model 140
|
Kohler Carburetor Bowl for 110, 112, 120 & 140 with Kohler engines
All models 110, 120, 140
1969-74 model 112
|
1969-74 models 110, 112, 120 & 140 with 39-inch mower deck blade kit - Kit includes 3-blades
|
1966-74 models 112, 120 & 140
46-inch mower deck blade kit
Kit includes 3-blades
|
Gas tank threaded nipple 1/8"
|
Width of Cut decal
For 1969-74 Models 60, 70, 110, 112, 120 & 140
|
Tie Rod Ball Joint Replacement Kit includes
Note: 2 each are (right hand ball joint/left hand ball joint) needed for complete rebuild
|
Drag Link Ball Joint Replacement Kit
Includes 2 right hand ball joints
|
Axle Bearing Kit (includes two bearings)
1963-74 model 110
1966-74 model 112
1970-71 model 120
1968-70 model 140
200 series
|
Drive Shaft Bearing Kit (2 bearings per kit)
Heavy-Duty Wheel Bearing
For 1970-71 model 120 & 140 with serial #21493 (later 1969) and up
|
10 Amp Voltage Regulator
For 1968-74 model 110
For 1968-74 model 112
For 1970-71 model 120
For 1968-74 model 140
|
Large caution decal
For 1969-74 Models 60, 70, 110, 112, 120 & 140
|
Small caution decal
For 1969-74 Models 60, 70, 110, 112, 120 & 140
|
Price: $85.00 Temporarily out of stock 7/30/19
For model 1969-74 110, 112, 120, and 140
Limited quantity!
|